You’ve come to the right place for how to resolve Fronius inverter error codes, specifically the 996 error code.

Fronius error code 996 occurs when your Fronius solar inverter looses its connection to the internet via your router. This can occur because you have changed your internet service provider since the inverter was installed or because the Wi-Fi signal strength at the Fronius inverter location is weak or intermittent.

If you have not changed internet service provider or changed your Wi-Fi password in your router you can try to reset the solar power inverter by simply turning off the AC solar supply main switch which should be located either next to your inverter or in your switchboard.

After 30 seconds turn the AC solar supply main switch back on and the solar inverter should reconnect to the internet.

If you have changed your internet service provider or the password and you have a Fronius Galvo, Primo or Symo inverter then you will need to contact our SunWorks solar installers Sunshine Coast team on (07) 5479 3355 for detailed instructions on how to change the network settings in the inverter.

Please note that if you are asked to provide an admin password you will need to contact your solar installation company for this.

Fronius Solar Inverters Logo